Wall Mounting Kit Type D for Unify Enclosures – RAKwireless
Mounting kit for fixing a Unify enclosure to walls or other flat, rigid surfaces. The Type D kit is compatible with all listed Unify enclosure sizes and includes brackets, screws, and wall plugs. The enclosure is not included.
incl. VAT4,76 €excl. VAT4,00 €plusShipping Costs
6 in stock
Product Description
Technical Details
This kit is used to mount a Unify enclosure on a flat and stable surface. The brackets attach to the rear of the enclosure using the integrated mounting points and are secured with M3 fasteners into the built-in brass threaded inserts.
It fits installations on walls, backboards, cabinets, mounting plates, and other rigid surfaces where the enclosure needs a clean and permanent fixing point. In practical use, this is the right accessory when a Unify enclosure should be mounted properly to a surface instead of being left loose inside a cabinet or fixed with improvised hardware.
The Type D version is compatible with all listed Unify enclosure sizes: 100 x 75 x 38 mm, 150 x 100 x 45 mm, and 180 x 130 x 60 mm. The kit supports fixing screws up to 5 mm in diameter. The package includes two wall mount brackets, four stainless steel screws for attaching the brackets to the enclosure, and two self-tapping screws with wall plugs for mounting on typical wall materials.
| Product | Unify Wall Mounting Kit (Type D) |
|---|---|
| Type | Type D |
| Use | Wall mounting on flat, rigid surfaces |
| Material | ABS UL94V-0 |
| General wall thickness | 4.0 mm |
| Compatibility | Unify Enclosure 100 x 75 x 38 mm, 150 x 100 x 45 mm, 180 x 130 x 60 mm |
| Screw compatibility | For fixing screws up to 5 mm diameter |
| Enclosure attachment | M3 fastening into integrated brass threaded inserts |
| Package includes | 2 x Unify Wall Mount (Type D), 4 x M3x8 mm stainless steel screws, 2 x 3.5×25 mm self-tapping screws, 2 x wall plugs |
| Note | Wall plugs require a 5 mm drill hole in typical wall materials |
| Enclosure included | No |
