
RAKwireless LoRaWAN Environmental Monitoring Node RAK7204 EU868
Battery-powered LoRaWAN® indoor sensor for temperature, humidity, pressure, and IAQ (indoor air quality index). Built for smart buildings and room climate monitoring with multi-year battery life.
incl. VAT64,26 €excl. VAT54,00 €plusShipping Costs
5 in stock
The RAK7204 WisNode Sense Home is a compact indoor environmental monitoring station that combines key room metrics in one device: temperature, humidity, barometric pressure, and an IAQ (Indoor Air Quality) index. Data is accumulated on the node and sent via LoRaWAN® to a gateway for cloud forwarding.
It is designed for very low power operation: with the included non-rechargeable battery, the manufacturer states 2+ years of operation. Firmware allows you to adjust the sensor sampling interval and the transmission cycle, making it easy to optimize for either tighter monitoring or maximum battery life.
The integrated design fits the electronics and battery into a 90 × 85 × 34 mm enclosure. With a built-in LoRa antenna and a swappable battery, it’s well suited for locations without mains power—offices, classrooms, warehouses, and temporary installations.
Typical use cases:
Smart buildings and facilities: room climate + IAQ monitoring across zones
Warehouses: humidity/temperature tracking for storage conditions
Technical rooms: early warning of abnormal humidity/temperature changes
Battery notes (from the text): the included battery is non-rechargeable. If using the Micro-USB port for configuration, the battery should remain connected. The battery connector has 2.0 mm pin spacing; polarity must be confirmed when replacing to avoid damage/overheating.
| Brand | RAKwireless |
|---|---|
| Model | RAK7204 |
| Product | WisNode Sense Home |
| Function | LoRaWAN® indoor environmental monitoring station |
| Measured parameters | Temperature, humidity, pressure, IAQ (indoor air quality index) |
| Sensor | BOSCH BME680 Integrated Environmental Unit |
| LoRaWAN | LoRaWAN® 1.0.2 fully compliant |
| Standby current | < 15 µA |
| Sensor working current | < 10 mA |
| LoRa transmission current | < 150 mA |
| Battery | Replaceable, lithium, non-rechargeable |
| Battery type | ER18505 |
| Nominal battery voltage | 3.6 V |
| Nominal capacity | 3500 mAh |
| Battery life | 2+ years (stated) |
| Enclosure dimensions | 90 × 85 × 34 mm |
| Operating temperature | -40 °C to +85 °C |
| Storage temperature | -40 °C to +85 °C |
| Temperature specs | Accuracy 0.5 °C; resolution 0.01 °C; range -40 °C to +85 °C |
| Humidity specs | Accuracy ±3 % r.H.; resolution 0.008 % r.H.; range 0–100 % r.H. |
| Pressure specs | Accuracy ±0.6 hPa; resolution 0.18 Pa; range not clearly stated in text |
| IAQ specs | Range 0–500; accuracy 15; resolution 1 |
| Note | Battery connector pin pitch 2.0 mm; confirm polarity when replacing (stated) |


