LoRaWAN + BLE Core Module Apollo3 SX1262 – RAKwireless RAK11722868 MHz
The RAK11722 is a WisBlock Core module that combines LoRaWAN and Bluetooth Low Energy for ultra-low-power IoT end nodes. It enables fast prototyping on WisBlock base boards with plug-in sensors and IO, without designing a custom PCB.
incl. VAT17,85 €excl. VAT15,00 €plusShipping Costs
3 in stock
Product Description
Technical Details
The RAKwireless RAK11722 is a WisBlock Core module built around the Ambiq Apollo3 Blue (AMA3B1KK-KBR-B0) with a Semtech SX1262 LoRa transceiver. It delivers LoRaWAN + BLE in one compact processing module, making it a strong choice when you need long-range LPWAN connectivity plus a convenient local wireless link for setup, commissioning, or nearby control.
Paired with WisBlock base boards and WisBlock sensor/IO modules, it’s designed for quick development and integration. The module supports LoRaWAN 1.0.3, OTAA/ABP, and LoRa P2P, and ships with RUI3-based AT firmware; you can also build custom firmware using the RUI3 API (including Arduino workflows) to integrate WisBlock modules into your application.
It targets battery and solar-powered deployments with very low sleep consumption (2.37 µA) and high transmit power (up to 22 dBm). Typical use cases include building automation, sensor networks, and remote monitoring, with an onboard BLE chip antenna and an MHF connector for the LoRa antenna.
| Product type | WisBlock Core module (LoRaWAN + BLE) |
|---|---|
| Brand / Manufacturer | RAKwireless |
| Model | RAK11722 |
| MCU / SoC | Ambiq Apollo3 Blue AMA3B1KK-KBR-B0 |
| LoRa chip | Semtech SX1262 |
| CPU | ARM Cortex-M4F |
| Memory | 1 MB Flash, 348 KB SRAM |
| Wireless | LoRa + Bluetooth Low Energy (BLE) |
| LoRaWAN | LoRaWAN 1.0.3 compliant |
| LoRaWAN activation | OTAA / ABP |
| Communication modes | LoRaWAN, LoRa point-to-point (P2P) |
| Supported bands | EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, AS923-1/2/3/4 |
| Interfaces / I/O | UART, I2C, SPI, ADC, GPIO |
| Firmware | RUI3-based AT firmware; custom firmware via Arduino using RUI3 API |
| AT commands | AT command set via UART |
| LoRa TX power | Up to 22 dBm |
| Range | Greater than 10 km (with optimized antenna) |
| Sleep current | 2.37 µA (sleep mode) |
| Supply voltage | 1.8 V to 3.6 V |
| Temperature range | -40 °C to +85 °C |
| Antenna / connectors | Onboard BLE chip antenna; MHF connector for LoRa antenna |
